600kg 800kg šaukuwa Manual tsotsa Liftter Pneumatic Glass Vacuum Lifter
Max.SWL 800KG
1. Juyawa 360 da hannu° a gefen tsaye, kuma da hannu ya juya 90° a gefen kwance, amma ɗauka da sakewa ta hanyar lantarki
2. Dukansu ƙarshen mariƙin kofin tsotsa suna iya jurewa, dace da lokatai tare da manyan canje-canje masu girma
3. Shigo da famfo mara amfani da mai, bawul
4. Ingantacce, aminci, sauri da ceton aiki
5. Accumulator da gano matsa lamba tabbatar da aminci
6. Matsayin kofin tsotsa mai daidaitacce kuma ana iya rufe shi da hannu
7.Yawanci jan ƙarfe tare da gada crane don amfani a cikin gilashin zurfin aiki da sarrafa aiki, ko tare da crane cantilever don amfani da aikin bangon bangon gilashin gilashi.
| Serial No. | Saukewa: GLA600-8-BM | Max iya aiki | 600kg |
| Gabaɗaya Girma | 1000X1000mmX490mm | Tushen wutan lantarki | 4.5-5.5 mashaya matsa iska, Amfani da matsawa iska 75～94L/min
|
| Yanayin sarrafawa | Manual slide bawul iko Vacuum tsotsa da saki | Lokacin tsotsa da lokacin saki | Duk ƙasa da daƙiƙa 5; (Lokacin sha na farko ya ɗan fi tsayi, kusan 5-10 seconds) |
| Matsakaicin matsa lamba | digiri 85% (kimanin 0.85Kgf) | Matsin ƙararrawa | 60% vacuum digiri (kimanin 0.6Kgf) |
| Safety factor | S> 2.0; Gudanarwa a kwance | Mataccen nauyin kayan aiki | 95kg (kimanin) |
| Rashin wutar lantarki Tsayawa matsa lamba | Bayan gazawar wutar lantarki, lokacin riƙewar tsarin injin da ke ɗaukar farantin shine> 15 mintuna | ||
| Ƙararrawar tsaro | Lokacin da matsa lamba ya yi ƙasa da saitin ƙararrawa, ƙararrawar ji da gani za su yi ƙararrawa ta atomatik | ||
Kushin tsotsa
Sauƙaƙan musanya • Juya kan kushin
• dace da yanayin aiki daban-daban
• Kare saman kayan aiki
Akwatin sarrafa wutar lantarki
• Sarrafa injin famfo
• Yana nuna injin
Ƙararrawar matsi
Vacuum ma'auni
• Share nuni
• Alamar launi
• Ma'aunin madaidaici
• Samar da tsaro
Vacuum famfo
• Ƙirƙirar wutar lantarki
•Matsi mara kyau
•Rashin amfani da makamashi
• Tsayayyen aiki.
| Samfura | Saukewa: GLA400-4-BM | Saukewa: GLA600-8-BM | Saukewa: GLA800-8-BM | |
| Max. load iya aiki | 400kg | 600kg | 800kg | |
| Ayyuka | Motsawa Load: Juyawa ta hannu, 360° gefe, tare da kullewa a kowane maki kwata Manual karkatar da hankali, 90°tsakanin madaidaiciya da lebur, tare da latching ta atomatik a madaidaiciyar matsayi. | |||
| Tsarin Wuta | DC12V | DC12V | DC12V | |
| Caja | Saukewa: AC110-220V | Saukewa: AC110-220V | Saukewa: AC110-220V | |
| Yawan tsotsa | 6 | 8 | 8 | |
| Girman tattarawa | 1000X1000mmX490mm | |||
| | Jimlar Tsayi: 3.7m Tsawon Hannu: 3.5m (An gyara ginshiƙi da hannu na lilo bisa ga ainihin halin da abokin ciniki ke ciki) Bayani dalla-dalla: Diamita 245mm, Dutsen farantin karfe: Diamita 850mm Abubuwan da ke buƙatar kulawa: Kauri na simintin ƙasa≥20cm
| |||
| 1 | ƙugiya mai ɗagawa | 7 | Tsawaita katako |
| 2 | Akwatin Sarrafa Gabaɗaya | 8 | Abubuwan tsotsa |
| 3 | Canjin wuta | 9 | Sarrafa hannu |
| 4 | Buzzer | 10 | Jirgin iska |
| 5 | Vacuum ma'auni | 11 | Vacuum famfo |
| 6 | Volta mita | 12 | Taimakon kafa |
1. Wannan inji ne yadu amfani a miƙa mulki na daban-daban irin m gilashin, laminated gilashin, raw gilashin da tempered gilashin, da dai sauransu.
2. American DC injin famfo + DC baturi aka soma; Lokacin amfani, babu buƙatar haɗa sauran tushen iska ko tushen wuta.
3. Dijital nuni injin matsa lamba canji da baturi cajin nuna alama, wanda zai iya saka idanu lafiya aiki na kayan aiki more fili.
4. Tare da tsarin cajin matsa lamba, kayan aiki na iya tabbatar da tsarin tsarin gaba ɗaya a cikin ƙimar matsi mai aminci mai mahimmanci a lokacin canji.
Gilashin allo
Allolin Aluminum
Karfe Allunan
Allolin filastik
Dutsen Dutse
Laminated chipboards
Tun lokacin da aka kafa shi a cikin 2006, kamfaninmu ya yi aiki fiye da masana'antu 60, ana fitar dashi zuwa kasashe fiye da 60, kuma ya kafa alamar abin dogara fiye da shekaru 17.
